§ 35-B109. Master Development Plan.

(a)

Number of Copies. The applicant shall submit to the director of planning and development services an application, plan review fee, processing and final blue or black-line folded prints of the plan, and a legible eight and one-half by eleven (8½ x 11) inch reduced copy. The director of planning and development services may require the applicant to submit up to ten (10) processing and five (5) final blue or black-line folded prints of the plan. Requests for review to respective departments or agencies shall be attached to the processing copies. In addition to the hard copies, information shall be submitted in a digital data format as outlined in section 35-B101.

(b)

Format. The plan shall be drawn on sheet(s) no larger than twenty-four (24) inches wide and thirty-six (36) inches long with appropriate side margins. The plan shall be drawn at a scale of one hundred feet to one inch (1"= 100') unless a smaller scale is approved by planning. Where more than one (1) sheet is necessary to accommodate the entire site, an index sheet showing the entire area at an appropriate scale shall be attached.

(c)

Contents. The master development plan shall include the following information:

(1)

The information required by Table B101-1 of this appendix.

(2)

A TIA in accordance with section 35-502.

(Ord. No. 98697 § 1)(Ord. No. 2015-12-17-1077 , § 2, 12-17-15)