§ 35-344.02. "PUD" Planned Unit Development Districts Established Subsequent to January 1, 2016.

(a)

Applicability. The provisions of this section apply to any application for rezoning of a tract, parcel or land area to a planned unit development district after January 1, 2016 with the exception of those planned unit development subdivisions established within the ETJ prior to January 1, 2016 and annexed into the city after January 1, 2016.

(b)

Initiation. A proceeding for approval of a planned unit development zoning district shall be initiated by filing an application with the director of development services. The application must meet the following minimum criteria:

(1)

The application shall include a site plan that is prepared to scale. The site plan must be drawn with dimensions and a graphic scale must be provided.

(2)

To provide adequate information for city council to make an informed decision on a request for a planned unit development zoning district, each site plan shall illustrate the following:

A.

PUD perimeter setback lines.

B.

Refer to appendix B: Application Submittal for PUD Plan for remaining requirements.

(c)

Completeness Review. The director of development services shall conduct a completeness review as set forth in section 35-402 of this chapter. The appellate agency for purposes of completeness review (see subsection 35-402(c) of this chapter) shall be the zoning commission.

(d)

Decision. The procedure for approving a planned unit development zoning district boundary shall be as required for a rezoning (subsection 35-421(d)) and as further provided herein.

(e)

Evaluation Criteria. In order to foster the attractiveness of a planned unit development and its surrounding neighborhoods and thereby preserve property values, and in order to provide an efficient road and utility network, ensure the movement of traffic, implement comprehensive planning, and better serve the public health, safety, and general welfare, the following criteria shall be utilized by the zoning commission and city council in reviewing PUD plans in conjunction with the request for PUD zoning. These criteria shall neither be regarded as inflexible requirements nor are they intended to discourage creativity or innovation.

(1)

Insofar as practicable, the landscape shall be preserved in its natural state by minimizing tree and soil removal.

(2)

Proposed buildings shall be sited harmoniously to the terrain and to other buildings in the vicinity that have a visual relationship to the proposed buildings.

(3)

With respect to vehicular and pedestrian circulation and parking, special attention shall be given to the location and number of access points to public streets, width of interior drives and access points, general interior circulation, separation of pedestrian and vehicular traffic, and the arrangement of parking areas that are safe and convenient and, insofar as practicable, do not detract from the design of proposed structures and neighboring properties.

(4)

Private streets and gates shall conform to article V of this chapter.

(f)

Minimum Size. There is no minimum size for a planned unit development.

(g)

Permitted Uses and Density.

(1)

Uses. A planned unit development may include residential, commercial and industrial uses; cluster housing; common areas; unusual arrangements of structures on site; or other combinations of structures and uses that depart from standard development. The uses permitted in a "PUD" are those designated in the approved PUD plan. Density limits are used to determine the maximum number of permitted dwelling units.

Planned unit developments containing one (1) single zoning district shall be annotated with the zoning district (PUD "RE," PUD "R-20," etc.) and may be developed to the density indicated in the maximum density table in subsection (2) below.

Planned unit developments which contain more than one (1) zoning district shall have each zoning district annotated as (PUD "RE," PUD "R-20," etc.) and each individual district may be developed to the density indicated in the maximum density table in subsection (2) below.

(2)

Density Table. The PUD plan shall divide the PUD into land use categories and shall indicate the uses permitted in each category. For residential land use categories, the maximum number of dwelling units permitted per acre for each land use category is as follows:

Land Use Category	Maximum Density
"RE"	1
"R-20"	2
"R-6"	5
"RM-6"	5
"R-5"	6
"RM-5"	6
"R-4"	7
"R-3"	10
"RM-4"	7
"MF-18"	18
"MF-25"	25
"MF-33"	33
"MF-40"	40
"MF-50"	50
"MF-65"	65

 

 

Total allowable density is calculated by multiplying the amount of net usable acres times the appropriate number above. Floodplains (100-year), steep slopes, non-buildable areas and existing easements are not used to determine net acreage.

Example: On a twelve (12) acre tract with one and one-half (1½) acres of unusable space, with an "R-6" zoning district. Usable acreage ten and one-half (10½) times table number (5) allows fifty-two and one-half (52½) units. The maximum number of units that may be built may not be further increased by using the provisions of division 6 flexible zoning of this article.

(3)

Attached Dwelling Units. Dwelling units may be attached in all PUD districts except for land use categories designated "RE" and "R-20."

(4)

Lots. There is no minimum area requirement for lots and lots need not front onto a street. Lot boundaries may coincide with structure boundaries except where perimeter lot setbacks are required.

(h)

Height and Yard Requirements.

(1)

Height Limitation. The maximum height of structures shall be as prescribed below; however, any portion of a structure may exceed this limit provided such portion is set back from the side and rear lot lines, or setbacks if required, one (1) foot for each two (2) feet of height in excess of the maximum building height. Distance credit shall be permitted for space occupied by structures of conforming height extending from the lot lines or setbacks as applicable.

Structures devoted to the following uses:	Shall be restricted to the following height:
Dwelling, one family; Dwelling, single-family; Duplex; Dwelling, one-family attached; Dwelling, single-family detached; Dwelling, two-family (duplex); Dwelling, two-family attached; Dwelling, three-family (triplex); Dwelling, four-family (quadraplexes)	35 feet
Multi-Family not exceeding 25 units/acre	45 feet
Multi-Family not exceeding 33 units/acre	60 feet
Multi-Family not exceeding 40 units/acre	84 feet
Multi-Family not exceeding 65 units/acre	—
Commercial Buildings except as otherwise listed below	35 feet
Malls, shopping centers, or collection of shops - regional center (enclosed mall with two (2) or more anchors) or super regional center (similar to regional, but with three (3) or more anchors)	45 feet
Light Industrial uses (uses permitted in the "L" district)	35 feet
General Industrial uses (uses permitted in the "I-1" and "MI-1" districts)	60 feet
Mixed use buildings may be as tall as allowed by the most intense use included in the structure pursuant to this table

 

(2)

Fences.

A.

Along collector and arterial streets, fences or walls within a PUD may extend to a height of eight (8) feet subject to the clear vision area requirements for fences in section 35-514.

B.

No such fence or wall, or portion thereof, shall exceed one hundred (100) horizontal feet in length unless one (1) of the following architectural features visible from the paved surface of the street is provided as part of the fence:

1.

A column or pillar; or

2.

Articulation of the surface plane wall by incorporating plane projections or recesses having a depth of at least one (1) foot and extending a horizontal distance not less than three (3) or more than twenty (20) feet.

C.

The provisions of subsection B., above, shall not apply to a fence or wall constructed of brick, masonry, or wrought iron consisting of at least fifty (50) percent open voids. The square footage of the fence shall be measured by taking the total square footage of an area defined by the length of the fence and its average height. The percent of open voids shall then be derived by dividing the total square footage of the open voids by the total square footage of the area calculated above, and multiplying this figure by one hundred (100). The fence's framing (the vertical posts supporting the fence from the ground and no more than three (3) horizontal cross bars between the posts, or brick or stone pillars) shall not be included in the calculation of the total square footage, provided the framing posts and cross bars do not exceed a four-inch width and the posts are spaced at least eight (8) feet apart.

(i)

Required Setbacks.

(1)

Residential Including Multi-Family Uses. Required PUD perimeter setbacks shall be twenty (20) feet.

(2)

Nonresidential Uses. Required PUD perimeter setbacks shall be the same as for the applicable zoning district which the nonresidential use would be allowed in if it were not a PUD.

The city council may approve lesser setbacks after considering physical features such as the location of trees, waterways, steep slopes, easements, other buffers and/or compatibility of the PUD with adjacent land uses provided such setbacks meet the requirements of the current adopted International Building Code.

No setbacks are required for residential or nonresidential interior lots provided the requirements of the current adopted International Building Code or the International Residential Code are met. Provisions of subsection 35-373(c) Zero Lot Line Development do not apply in a PUD.

(3)

If access to a garage is provided from the front or side of a lot, then the garage shall maintain a setback as indicated in subsection 35-516(g) of this chapter.

(j)

Infrastructure Requirements.

(1)

Streets and Sidewalks. Streets within a PUD may be public or private. Vehicular circulation may also be provided by internal private drives. Private drives must meet the requirements for fire lanes as per the International Fire Code Appendix D for width, lengths turnarounds, and parking requirements whether for a commercial or residential base zoning. A building permit must be obtained for private drives, and would include site plan review and inspection for flatwork/civil work within the public ROW. However, the planning commission may require dedication and construction of public streets through or into a PUD through the platting process. Public or private streets shall conform to the transportation standards of this chapter (see section 35-506 of this chapter).

(2)

Utilities. All utility systems shall comply with the utilities standards of this chapter. Water and sanitary sewer systems within a PUD may be publicly or privately owned; however, the maintenance of private systems shall be the responsibility of the PUD community association. Public utility systems shall be approved by the applicable agency or city department.

(3)

Easements. Publicly owned and/or maintained utilities shall be placed in public streets or easements which are a minimum of sixteen (16) feet in width unless a narrower width is approved by the applicable utility. Dead-end easements shall not be permitted unless a city approved vehicular turnaround is provided at the end of each such easement.

(4)

Garbage Collection. If in the opinion of the solid waste management director, private streets in a PUD are arranged so that garbage may be collected without creating a safety hazard, the city will collect the garbage provided proper indemnification is received from the community association or individual property owners. Garbage collection locations shall be subject to the approval of the solid waste management director. In the event the city does not collect garbage within a PUD, all units within the PUD may be exempted from payment of garbage fees upon furnishing of evidence ensuring acceptable removal of all garbage and refuse by private means. To receive such exemption, written application must be submitted to and approved by the finance director.

(k)

Parks/Open Space.

(1)

Residential. Each residential PUD plan shall provide for a minimum amount of parks/open space as required by the parks/open space standards (section 35-503) of this chapter. Residential PUDs may not use a fee in lieu for meeting parks/open space requirements.

(2)

Commercial. All commercial and industrial PUDs will contain a minimum of twenty (20) percent of parks/open space.

(3)

Mixed-Use. Mixed-use developments shall be divided into separate residential and commercial areas which must separately meet the requirements of this paragraph and subsection 35-344(c)(2). Mixed use buildings that include residential use shall meet the residential requirements of this subsection.

(4)

Reduction in Parks/Open Space. At its discretion, the city council may approve a decrease in the amount of required parks/open space when the PUD plan includes unique design features or amenities which achieve an especially attractive and desirable development such as, but not limited to, terraces, sculpture, water features, preservation and enhancement of unusual natural features, or landscape sculpture (areas which are intensely landscaped).

(l)

Parking Requirements. Off-street parking and truck loading facilities shall be provided in accordance with parking standards of this chapter. Parking shall be prohibited on any private street or private drive, excluding driveways on interior lots less than twenty-eight (28) feet in width, and if utilized on streets twenty-eight (28) feet or wider, the parking must be clearly distinguishable from the movement lanes.

(m)

Common Areas and Facilities. Provisions shall be made for a property owners' association that is designated as the representative of the owners of property in a residential subdivision. The property owners' association shall have the direct responsibility to provide for the operation and maintenance of all common areas and facilities, including private streets and sidewalks, which are a part of the PUD. The applicant shall submit the dedicatory instrument(s) covering the establishment, maintenance, and operation of a residential subdivision. The dedicatory instrument(s) shall establish a plan for the use and permanent maintenance of the common areas/facilities and demonstrate that the property owners' association is self-perpetuating and adequately funded by regular assessment and/or special assessment to accomplish its purposes. The dedicatory instrument(s) shall include provisions that provide the city with permission for access at any time without liability when on official business, and further, to permit the city to remove obstructions if necessary for emergency vehicle access and assess the cost of removal to the owner of the obstruction.

"Property owners' association" means an incorporated or unincorporated association that;

A.

Is designated as the representative of the owners of property in a residential subdivision;

B.

Has a membership primarily consisting of the owners of property covered by the dedicatory instrument for the residential subdivision; and

C.

Manages or regulates the residential subdivision for the benefit of the owners of property in the subdivision.

"Dedicatory instrument" means each governing instrument covering the establishment, maintenance, and operation of a residential subdivision. The term includes restrictions or other similar instruments that subject property to restrictive covenants, bylaws, or similar instruments governing the administration or operation of a property owners' association; allow for properly adopted rules and regulations of the property owners' association; and authorize enactment of lawful amendments to the covenants, bylaws, rules, or regulations.

"Property owners' association" means the designated representative of the owners of property in a subdivision and may be referred to as a "homeowners' association," "community association," "civic association," "civic club," "association," "committee," or similar term contained in the dedicatory instrument.

"Regular assessment" means an assessment, a charge, a fee, or dues that each owner of property within a residential subdivision is required to pay to the property owners' association on a regular basis and that is designated for use by the property owners' association for the benefit of the residential subdivision as provided by the dedicatory instrument.

"Special assessment" means an assessment, a charge, a fee, or dues, other than a regular assessment, that each owner of property within a residential subdivision is required to pay to the property owners' association, according to the procedures required by the dedicatory instrument, for:

A.

Defraying, in whole or part, the cost whether incurred before or after the assessment, of any construction or reconstruction, unexpected repair, or replacement of a capital improvement in common areas owned by the property owners' association, including the necessary fixtures and personal property related to the common areas;

B.

Maintenance and improvement of common areas owned by the property owners' association; or

C.

Other purposes of the property owners' association as stated in its articles of incorporation or the dedicatory instrument for the residential subdivision.

(n)

Amendments. Alterations to a PUD plan shall be classified as either minor or major amendments. Minor amendments may be approved by the development services director. Major amendments shall be considered by the zoning commission and city council following the same procedure required for the initial approval of the plan, including payment of the application fee. The following criteria shall be used to identify a major amendment:

(1)

A change which would include a land use not previously permitted under the approved PUD zoning.

(2)

A change which would alter the land use type adjacent to a PUD boundary.

(3)

A change which would increase the overall density of the PUD by more than ten (10) percent. However, in no instance may the overall density of the PUD exceed that permitted by the base zoning district.

(4)

A change which the director of development services determines would significantly alter the general character or overall design of the plan.

(Ord. No. 2015-12-17-1077 , § 2, 12-17-15)