§ 35-B103. Development Plat Application.

(a)

Number of Copies. As set forth in section 35-433, the director may require the applicant to submit up to seven (7) blue or black-line folded prints of the final development plat and letters of certification with city department and or agency reviews. In addition to the hard copies, information shall be submitted in a digital data format as outlined in section 35-B101.

(b)

Format. The development plat boundary survey shall be drawn on sheet(s) no larger than eighteen (18) inches wide and twenty-four (24) inches long with appropriate side margins. Development plat shall be drawn at a scale of one hundred feet to one inch (1"= 100') unless a smaller scale is approved by the director of planning and development services. Where more than one (1) sheet is necessary to accommodate the entire area to be developed, an index sheet showing the entire area at an appropriate scale shall be attached.

(c)

Contents. The development plat shall be prepared as a boundary survey showing:

(1)

All of the information required by Table B101-1 of this appendix;

(2)

Each existing or proposed building, structure, or improvement or proposed modification of the external configuration of the building, structure, or improvement involving a change of the building, structure, or improvements;

(3)

Each easement and right-of-way within or abutting the boundary of the surveyed property;

(4)

The dimensions of each street, sidewalk, alley, square, park, or other part of the property intended to be dedicated to public use or for the use of purchasers or owners of lots fronting on or adjacent to the street, sidewalk, alley, square, park, or other part;

(5)

A title clearly stating "Development Plat" at the top, the name of the property owner, and the signature and seal of the preparing surveyor; and

(6)

Sufficient topographic information mapping shall be accomplished and shown on the development plat for the review and determination of any proposed drainage easements.

(d)

Certification. A development plat must be prepared and signed by a registered professional land surveyor.

(Ord. No. 2015-12-17-1077 , § 2, 12-17-15)